Super soft good price spunlace non woven fabric 30% polyester + 70% viscose spunlace nonwoven roll for wipes

Super soft good price spunlace non woven fabric 30% polyester + 70% viscose spunlace nonwoven roll for wipes

Viscose PET Nonwoven Fabric is made from high grade viscose and polyester with advanced spunlace technology. There is low fiber shedding and no fiber chips come off when uses. It ensures the quality of wiping. Dot Embossed pattern has excellent transverse tensile. It's soft and would not do damage to any surface, no scratch. Unique Absorption and suction capacity, it is 4 times better than common cotton cloth. It applied in wet wipes, compressed towels, Kitchen Wipes, dishcloths, and industrial wipes, etc.

Typical Fiber types in spun-lace for wet wipes
Here is a list of the typical fibre types that can be found in wet wipes and their properties:

(1)Polyester (PET) & Polypropylene (PP)
These plastic fibres are made through extruding molten polymer through small holes. They are widely used in producing wet wipes as they are renowned for having good strength. The disadvantage to these fibres is they have poor absorbency due to being naturally hydrophobic.

(2)Viscose (Rayon in the USA) & Tencel
These are both made from wood pulp or bamboo pulp and therefore come from a renewable raw material. They naturally have good absorbency and strength properties and are known for their softness. They tend to be used in applications where they prevent irritation to the skin.

(3)Wood pulp
The main types of wood pulp are softwood and hardwood; which are 3mm and 1mm in length respectively. They have a high surface area and a flat ribbon-like morphology which gives them good cleaning properties. They also have good absorbency but as a downside tend to have poor strength.

(4)Cotton
The fibre length of cotton varies greatly with each seed, from 3mm to 30mm. In comparison to Viscose, it has a better absorbent capacity and wicking but it does not have the same level of softness. Cotton is known for its good cleaning properties due to having a flat ribbon-like surface.

The most common fibre combination for spun-lace in wet wipes application is PET+VISCOSE. In fact, With the development of spunlaced nonwoven technology currently, we have adopted some new spunlaced technology to produce Woodpulp Spunlace Fabric which is gaining popularity and is seen as the replacement of some normal spun lace fabric, this fabric has 2 types:

Woodpulp +PET & Woodpulp+PP

This wood pulp non woven fabric is more economic as the alternative substrate for spun-lace wipers.

Advantages of spunlace cloth:
1, soft, drape;
2, good strength;
3, with high moisture absorption and fast moisture;
4, low fluffing;
5, washable;
6, no chemical additives;
7, the appearance is similar to textiles.